Material: polyester film 0.010 thick max. White or clear matte finish. Adhesive: 0.005 thk max pressure sensitive modified acrylic adhesive. Applied as shown to one side of the polyester film adhesive to be protected with a paper liner in accordance with mil-p-19834. Adhesive peel: must withstand a 1.0 lb min, per inch of width, pulled at an angle of 180 degrees after the part has been in place on stainless steel or aluminum, with a surface finish of 60 plus/minus 30 microinches, for a of 20 minutes. Pressure sensitive adhesive.
No other part numbers with same form, fit, and function found.
NSN 5925-01-576-9256
NSN 6150-01-452-5874
NSN 6135-00-756-6149
NSN 5998-00-776-4637
NSN 6135-01-255-9129
NSN 7035-01-578-0644
NSN 6145-00-799-1125
NSN 5915-01-422-2014
NSN 5915-00-730-6761
NSN 6645-00-476-7176
NSN 6220-00-364-1605
NSN 5920-00-419-5382
Last Updated: 02/09/2025